Facility Monitoring & Management (FMM) Subscriber
4 analog and 4 digital inputs
The Facility Monitoring & Management subscriber uses wireless mesh technology to monitor such things as temperature, water levels and lights in a facility. Can be used with a new or existing AES network. Comes in a durable plastic enclosure.
Note: This product is still under development. To learn more, please contact your AES Sales Representative.
Ability to manage equipment remotely as well as monitor what is happening in your facility when you are not there. Sensors will let you know if there is a change in temperature, a water leak or any other unusual event.
Dimensions 10.04" W x 9.06" H x 1.29" D
Radio Frequency Standard Frequency Range: 450-470 MHz Contact AES for other UHF and VHF frequencies
Antenna 2.5 dB antenna included, mounts on enclosure Optional remote mounting antenna available
Power Output 2 Watts Factory set
Power Input TBD
Recharge Capability N/A
Backup Battery N/A
Alarm Signal Inputs 4 dry contact inputs
Antenna Cut/Communication Trouble Output Form C relay, fail secure, rated 24V DC 1A resistive, unsupervised
Reset Button Located on main circuit board
Operating Temperature 32° to 122°F
Storage Temperature 14° to 140°F
Relative Humidity 0 to 93%, non-condensing
Ports 2 USB and 1 Ethernet ports
Compatible Receivers 7705i and 7705ii AES-MultiNet Receiver
Current Consumption TBD
Enclosure Material Plastic
Enclosure Color TBD
Visual Indicators LED indicators for Alarm, Trouble, Receive, Transmit, and Trouble. Additional LED indicators for each relay output.
Programming Interface Laptop, smart phone, or tablet via Ethernet or WiFi dongle
- 4 dry contact inputs
- 4 form C relay outputs
- Programmable via ethernet and Wifi connection
- Supports BACnet protocol