7706-ULF Integrated Fire Monitoring System

Product Support

7706-ULF Integrated Fire Monitoring System

6 zone conventional FACP with Integrated AES fire alarm communicator. The 7706-ULF is a conventional FACP with an integrated AES IntelliNet communicator. Has 6 programmable zone inputs and 1 notification appliance circuit (NAC) with strobe synchronization.

Dimensions 18.5”H x 14.25”W x 4.75”D

Weight Approx. 17 lbs., excludes battery

Radio Frequency N/A

Antenna N/A

Power Output N/A

Power Input 120VAC 60Hz 1.0 AMP

Recharge Capability Enclosure capacity for two 14AH batteries. Will charge up to two 18 AH batteries. Sealed lead acid batteries – requires 2 each 12 VDC UL-recognized

Backup Battery N/A

Alarm Singnal Inputs - 6 Programmable Initiating Device Circuits
- 1 input – Type A (four wire) or Type B input (two wire)
- 5 inputs – Type B

Antenna Cut/Communication Trouble Output N/A

Antenna 2.5 dB tamper resistant enclosure mount antenna

Antenna Supervision N/A

Reset Button N/A

Operating Temperature 32° to 122°F

Storage Temperature 14° to 140°F

Relative Humidity 0 to 93% RHC, Non Condensing

Ports 1 Ethernet Port

Annunciator Remote Annunciator via the P-Link bus

Compatible Receivers 7705i and 7705ii AES-MultiNet

Current Consumption See AES 7706 Battery Calculator (add link to calculator)

Smoke Detector Compatibility Compatible with a large number of listed 2 wire models including:
System Senor, Detection Systems
ESL, Hochiki, Fenwal, Potter

NAC Output Compatible with a large number of listed 2 wire models including:
Amseco, Gentex, Potter/Gentex, Eaton, Cooper, Wheelock
System Sensor

NAC Patterns Temporal & Cadence patterns

Enclosure Material Steel

Enclosure Color Red

Visual Indicators LCD (2 × 16 Alphanumeric Character Display)
LED indicators – Control Panel and Subscriber

Programming Interface Laptop via ethernet using Potter programming software or integrated keypad

Meets NFPA 72 specifications and UL 864 standards
6 Programmable Zone Inputs
Integrated conventional FACP
Hardware Supervisory Module (satisfies full data primary communication requirements)
7794 AES IntelliPro full data module
Dual Communication/Multiple communication technology (reporting over RF and IP)
Integrated Local Annunciator
Secure Dealer Codes to safeguard critical data
32 Character LCD display with system LEDs for clear system status and Keypad access
One Notification Appliance Circuit (0.5A NAC) with strobe synchronization
2.5 dB rubber duck antenna
Programming via Laptop ethernet using Potter programming software or integrated keypad
LED indicators – Control Panel and Subscriber