INCC Setup & Installation
Follow the steps listed below to successfully install and transfer your AES Network to the IntelliNet Network Control Center (INCC) software platform.
- Step 1: Setting Up Your Operating System
- Step 2: Installing the INCC Software
- Step 3: Go Live on the INCC Platform
Before Your Begin
Step 1
Installing Ubuntu Operation System
Ubuntu 20.04 LTS (64 bit) is available at releases.ubuntu.com/20.04
The following instructions can also be found in the 8705 IntelliNetĀ® Network Control Center (INCC) Installation, Configuration, and Operations Manual, which can be accessed via the link below.
1. Select a language of your choice:
![](https://aes-corp.com/wp-content/uploads/2024/01/1.-Select-Language.png)
It is recommended that you continue without updating.
![](https://aes-corp.com/wp-content/uploads/2024/01/2.-Continue-without-updating.png)
2. Select a keyboard language from the Layout and Variant drop down lists:
![](https://aes-corp.com/wp-content/uploads/2024/01/3.-Select-keyboard-language.png)
3. Configure at least one interface the server can use to communicate with other machines. Start by clicking >eth > Edit IPv4.
![](https://aes-corp.com/wp-content/uploads/2024/01/4.-Define-static-IP-address.png)
4. Define the IP address by selecting Manual.
![](https://aes-corp.com/wp-content/uploads/2024/01/5.-Static-ip-define-in-Ipv4.png)
5. Add your static network values into the form, then click Save and Done.
![](https://aes-corp.com/wp-content/uploads/2024/01/6.-Static-Network.png)
6. Keep the default proxy settings, then click Done.
![](https://aes-corp.com/wp-content/uploads/2024/01/7.-Proxy-settings-save-to-done.png)
7. Keep the default mirror values, then click Done.
![](https://aes-corp.com/wp-content/uploads/2024/01/8.-Mirror-page-default-value.png)
8. In the Guided Storage section, set up the disk as an LMV group. Keep all other settings in default mode.
![](https://aes-corp.com/wp-content/uploads/2022/09/9.-Storage-section-use-LVM.png)
9. In the FILE SYSTEM SUMMARY section, you will need to define a maximum volume forthe server. Begin by selecting ubuntu-lv under USED DEVICES, then click Edit
![](https://aes-corp.com/wp-content/uploads/2024/01/10.-File-System-Summary.png)
10. In the Size field, enter the maximum size, then click Save:
![](https://aes-corp.com/wp-content/uploads/2022/09/11.-Size-row-max-size.png)
11. Confirm the storage space and click Done. Then approve the format and click on Continue.
![](https://aes-corp.com/wp-content/uploads/2022/09/12.-Confirm-storage-space.png)
12. On the Profile page, enter your VM profile information.
![](https://aes-corp.com/wp-content/uploads/2024/01/13.-Enter-VM-Profile.png)
13. On the SSH Setup page, check Install OpenSSH server and click Done.
![](https://aes-corp.com/wp-content/uploads/2022/09/14.-Check-Install-OpenSSH-server.png)
14. Click Done without making any selections (the INCC does not have any additional packages).
![](https://aes-corp.com/wp-content/uploads/2024/01/15.-Click-on-done-button.png)
15. Once the installation and update are finished for the Ubuntu Operating System, the Reboot Now button will appear. When ready, click Reboot Now.
![](https://aes-corp.com/wp-content/uploads/2024/01/16.-Reboot.png)
Step 2
Installing the INCC Software
Please use the INCC Scheduler (link below) to schedule a call with AES Technical Support. On this call an AES Technical Support team member will:
- Confirm your operating system is set up and ready for software installation
- Confirm the IP address of both servers and alarm automation software
- Provide you with your INCC License Key
- Assist you in the installation of your INCC software
- Set up a final call to migrate network data and go live
Helpful Resources
Download the INCC Installation & Setup Guide or watch the AES Training Academy’s How to Install the INCC video below!